Radio HF ICOM IC-M710

1136 channels

160 programmable, 242 ITU SSB duplex, 72 ITU SSB simplex and 662 ITU FSK duplex channels are available.

Rugged construction

The highest quality components are used throughout. Constructed in a die-cast aluminum chassis with surface mount components, the IC-M710 is designed for long hours of operation in the harsh marine environment.

Alphanumeric readout

The large, easy-to-read display shoes status at a glance. Seven characters can be programmed into each memory channel to conveniently display station names, ship names, etc.

150 W of output

A full 150 W (PEP) of output power is available for reliable long distance communication. A large cooling fan, in combination with the aluminum chassis, allows continuous transmission at full output power—even during demanding RTTY (radio teletype) and NBDP (narrow band direct printing) operation.

Automatic tuning function

An automatic tuning function is available when using the IC-M710 in combination with the optional AT-140 for quick and easy antenna tuning. Tuning is fully automatic. When you push the PTT on a new frequency, the antenna tuner quickly tunes the antenna automatically.

Easy to use

Two large memory and frequency dials allow quick and easy operation.

And more…

• Covers all allowed bands between 1.6 and 27.5 MHz
• General coverage receiver
• Modes: SSB, RTTY, CW and AM
• 2182 kHz alarm built-in (optional for General versions)
• RF gain control
• Audio activated squelch
• Terminals for frequency/mode control via NMEA interfacing
• Direct keypad channel selection entry
• Large, front-mounted speaker
• Direct keypad channel selection entry
• Weather fax ready
• Backlight control
• CW full break-in and semi break-in

Radio HF ICOM IC-M700Pro

Simplified operation

The IC-M700PRO is easy to use whether you are new to SSB or an expert. Channel selection is quick and easy to access with large, independent GROUP and CHANNEL knobs. Each panel button has only 1 function. The large, easy to read display shows channel (or frequency) and operating status at a glance. A new green LCD is easy to see in sunlight, but not too bright for night operations.

Powerful output extends your communications reach

The powerful 150 W* (PEP) transmitter provides long distance communication you can rely on. To make sure that power is always available to you—even during demanding RTTY (radio teletype) or E-mail operation—a large cooling fan combined with the ICM700PRO's aluminum chassis keep the radio cool.
* 60 W (PEP) above the 24 MHz bands.

Scanning functions

Locate desired signals quickly with a powerful memory scan feature.

Additional Features

• Automatic antenna tuner, the AT-140, is available to match the transceiver to your antenna
• Numerous operating modes* available: USB, AM, CW, FSK and AFSK
  *Ask your dealer for details.
• Wide band, general coverage receive — 0.5 to 29.9999 MHz
• Channel/frequency knob allows the user to tune specific frequencies around the memory channel
• NMEA plus 2 DIN connectors are available for external equipment connection, such as a linear amplifier, FSK terminal, E-mail modem, etc.
• Optional 2-tone alarm function (UT-95 2-TONE ALARM UNIT required) provides simple transmission of emergency signals
• NMEA0813 interface included

Handy Talky ICOM IC-M36

Other features

• Waterproof construction equivalent to IPX7 (1m depth for 30 minutes)
• Dual/Tri-watch functions
• 4-step battery life indicator
• Weather channel with weather alert
• Auto scan function
• Instant access to Ch 16 or Ch 9

Handy Talky ICOM IC-M34

Other features

• Powerful 5W output power
• Dual/Tri-watch functions
• 4-step battery life indicator
• Weather channel with weather alert
• 2-step power saver
• Auto scan function
• Instant access to Ch 16 or Ch 9
• Optional battery case for using with alkaline cells

Handy Talky ICOM IC-M24

Other features

• Submersible construction equivalent to IPX7
  (1m depth for 30 minutes)
• Dual/Tri-watch functions
• Auto scan function
• One-touch access to Ch 16
• 4-step battery life indicator
• Tag scan and Favorite channel functions
• Weather channel with weather alert (USA version)
• AquaQuake™ draining function

Handy Talky ICOM IC-F4003

Simple operation for instant communication

The IC-F3003 series is so easy to use there's no special training required. The few knobs and buttons are generously sized for easy operation and are designed to provide non-slip, positive action – even while wearing gloves.

Easy to hear in noisy areas

The built-in bridge-tied load (BTL) amplifier offers powerful 800mW* audio output from the large 45mm speaker. The radio delivers loud and intelligible audio even in noisy environments.
* Typical with internal speaker

Longer operating time

A new high efficiency FET of the IC-F3003 series reduces consumption current and provides 20 hours* of operating time with the BP-265, 2000mAh battery pack. Even when used with the BP-264, the radio offers 14 hours* of operating time.
*Tx:Rx:Standby=5:5:90. Power save function ON.

Weather resistant, dust protection, military rugged

While the radio is a compact unit with a height of only 111mm, the radio is tested to dust protection and water resistant equivalent to IP54 and 11 categories of MILSTD- 810 environmental test. In short, the IC-F3003 series is built rugged!

Internal VOX capability for hands-free operation

The radio has the internal VOX capability for hands-free operation. Optional compatible headset with plug adapter cable OPC-2004 can be used with the radio. Also, the VOX gain and VOX delay time are adjustable.

Selective calling, quiet stand-by and more

2-Tone and 5-Tone signalings give you selective calling, quiet stand-by and other convenient functions with programming. The radio “stun” function disables a radio over the air and the “revive” function restores the stunned radio.

Scan features

The priority scan allows you to monitor one or two priority channels while scanning other non-priority channels. The Tx channel and talk back functions allow you to make a quick response while scanning.

Other features

• DTMF autodial
• CTCSS/DTCS encoder/decoder
  
• BIIS PTT ID transmission
• MDC PTT ID and emergency
  
• Low battery alert
• 2-step power save
  
• PC programmable
• Time out timer
  
• Talk around function
• Lone worker function
  
• Enhanced emergency
• 3-color LED
  
• Surveillance function

Handy Talky ICOM IC-F3003

Simple operation for instant communication

The IC-F3003 series is so easy to use there's no special training required. The few knobs and buttons are generously sized for easy operation and are designed to provide non-slip, positive action – even while wearing gloves.

Easy to hear in noisy areas

The built-in bridge-tied load (BTL) amplifier offers powerful 800mW* audio output from the large 45mm speaker. The radio delivers loud and intelligible audio even in noisy environments.
* Typical with internal speaker

Longer operating time

A new high efficiency FET of the IC-F3003 series reduces consumption current and provides 20 hours* of operating time with the BP-265, 2000mAh battery pack. Even when used with the BP-264, the radio offers 14 hours* of operating time.
*Tx:Rx:Standby=5:5:90. Power save function ON.

Weather resistant, dust protection, military rugged

While the radio is a compact unit with a height of only 111mm, the radio is tested to dust protection and water resistant equivalent to IP54 and 11 categories of MILSTD- 810 environmental test. In short, the IC-F3003 series is built rugged!

Internal VOX capability for hands-free operation

The radio has the internal VOX capability for hands-free operation. Optional compatible headset with plug adapter cable OPC-2004 can be used with the radio. Also, the VOX gain and VOX delay time are adjustable.

Selective calling, quiet stand-by and more

2-Tone and 5-Tone signalings give you selective calling, quiet stand-by and other convenient functions with programming. The radio “stun” function disables a radio over the air and the “revive” function restores the stunned radio.

Scan features

The priority scan allows you to monitor one or two priority channels while scanning other non-priority channels. The Tx channel and talk back functions allow you to make a quick response while scanning.

Other features

• DTMF autodial
• CTCSS/DTCS encoder/decoder
  
• BIIS PTT ID transmission
• MDC PTT ID and emergency
  
• Low battery alert
• 2-step power save
  
• PC programmable
• Time out timer
  
• Talk around function
• Lone worker function
  
• Enhanced emergency
• 3-color LED
  
• Surveillance function